Your Location : Home » Products » Measuring Tools » Flaw Detector » Ultrasonic Digital Flaw Detector MFD800B

Ultrasonic Digital Flaw Detector MFD800B

Dimension and weight
Brochure
PDF Brochure

The MFD800B is an advanced digital ultrasonic flaw detector featuring a multi-color TFT LCD and a host of new features to meet challenging inspection requirements. 
It combines powerful flaw detection and measurement capabilities, extensive data storage, 
and the ability to transfer detailed inspection data to the PC via its high-speed USB port.
The instrument incorporates many advanced signal processing features including a 15MHz RF bandwidth to permit testing of thin materials, narrowband filters to improve signal to noise inhigh gain applications, a spike pulser for applications requiring higher frequencies, and a tunable square wave pulser to optimize penetration on thick or highly attenuating materials.
The instrument can be widely used in locating and sizing hidden cracks, voids, disbands, and similar discontinuities in welds, forgings, billets, axles, shafts, tanks and pressure vessels, turbines, and structural components.

Specifications

Range
 0 to 9999 mm, at steel velocity
Material Velocity
 1000 to 9999m/s
Display Delay
 -20 to 3400 μs
Probe Delay/Zero Offset
 0 to 99.99μs
Sensitivity
 110 dB max in selectable resolution 0.1, 1.0, 2.0, 6.0 dB and locked.
Test Modes
 Pulse echo, dual element and thru-transmission
Pulser
 Tunable Square Wave Pulser
Pulse Repetition Frequency ranges from 10 Hz to 1000 Hz
Pulse Energy
 Low, Medium and High
Damping
 100, 200, 400 ohms
Bandwidth (amplifier bandpass )
 0.5 to 15 MHz
Gate Monitors
 Two independent gates controllable over entire sweep range
Rectification
 Positive halfwave, negative halfwave, fullwave, RF
System Linearity
 Horizontal: +/-0.2% FSW, Vertical: 0.25% FSH, Amplifier Accuracy +/-1 dB.
Reject (suppression)
 0 to 80% full screen height
Units
 Inch or millimeter
Transducer Connections
 BNC or LEMO
Power Requirements
 AC Mains 100-240 VAC, 50-60 Hz
Operating Temperature
 -10 to 50
Storage Temperature
 -30 to 50

 

MFD800B Standard Configuration 
No.
Item 
Quantity 
1
Main Body
1
2
Straight Beam Probe 
1
3
Angle Probe 
1
4
Machine-probe Cable (Q9-Q9)
1
5
Battery Module
1
6
Power Adapter (Charger)
1
7
Support Pillar
1
8
Manual
1
9
Instrument Case
1
10
Datapro Software 
1
11
USB communication Cable
1

If you have any questions, please send an e-mail inquiry

  • * E-mail :
  • * Name :
  • * Telephone :
  • * Message :